Connect With Us:
  • stumble
  • youtube
  • pinterest
Call us now at 877-317-9737

Winterizing Your Boat Engine

Preparing boat engine for winter

Dry-docking your boat when the weather turns cold doesn’t mean that you can stop caring for it for a couple of months. If anything, during the bitter winter months actually means that you have to do a tad more work on it. Even when you are not actively using your boat, you still have to think of ways to ensure that it will be in tiptop shape when you finally take it out of storage. Winterizing your boat engine is all about protecting it from the damage that may be caused by harsh weather conditions. You have to be vigilant about how you treat your boat’s engine, if you want it to work well during the spring boating season.

Make your boat weather-proof

Winterizing a boat engine need not be a complicated, drawn-out process. Here are seven tips for winterizing your boat engine:

  1. Get rid of all the water. Flush out the cooling system of your boat with the help of a flushing kit that you can purchase from a boat supply store. This will help you clean out bits of rust, sediment, sand, and other debris that might have accumulated in the cooling system during the time the boat was in use. Pump some anti-freeze afterwards to discourage icing in the line.
  2. Fill the tanks with fuel stabilizer, and then with marine fuel. Run the engine long enough to get the treated gas into the engine and fuel line. This will ensure that the engine will start immediately even after your boat has been sitting in storage for a couple of months.
  3. Use corrosion inhibitors where necessary. Touch up flaking, peeling or cracked paint and douse it with a good amount of anti-corrosion spray. Corrosion won’t take a break just because it’s freezing outside, so you better pay attention to how your boat feels and looks like before you dry-dock it.
  4. Apply fogging oil on the outboard engine. Fogging will prevent corrosion from eating away at the metal parts of your boat while it is not in use. Fogging oil is especially formulated to stick to the cylinders instead of sliding down the walls.
  5. Replace the oil and oil filters as needed. Don’t wait for spring to roll around before you replace components that are already worn or malfunctioning. Your boat will definitely thank you for being kept in good condition even through the off-season.
  6. Check your propellers for nicks and other damage. The smallest dent can affect not only the props’ performance, but the entire engine and drive system as well. If the blades are damaged, it may encourage vibration in the engine when you next drive the boat out into the water.
  7. Spray on a generous amount of moisture-displacing lubricant onto the fuse panel and electrical terminals to discourage moisture from accumulating, no matter how cold the weather gets.

So when the weather turns cold next time, do your boat a favor by winterizing it properly before putting it into storage. A little  attention goes a long way into extending your boat’s usefulness and saving you from unnecessary repair costs.

Should you find it challenging winterizing your boat engine at home, you can seek the help of your mobile auto detailer. A professional detailing expert has got the tips and skills regarding carrying out the winterization of your boat engine effectively.



Comments are closed.

Calendar

October 2013
MTWTFSS
« Sep Nov »
 123456
78910111213
14151617181920
21222324252627
28293031